UTAH MUSEUMS / SUPPORTER KIT
Built 12 November 2026

Utah Museums (https://utahmuseums.com/) is a free guide to the museums of Utah,
written for families. This kit holds two badges you can put on your website.


1. WHAT EACH BADGE MEANS

FEATURED IN UTAH MUSEUMS
For a museum that has its own page in the guide. Link it to that page:
https://utahmuseums.com/<your-slug>/
(for example https://utahmuseums.com/alf-engen-ski-museum/).

PROUD SUPPORTER OF UTAH MUSEUMS
For anyone who likes the guide and links to it: a museum, a library, a school,
a visitor bureau, a blog, a family. Link it to https://utahmuseums.com/.

Please read this part:
- A listing in Utah Museums is free. Nobody pays to be listed, featured or
  ranked, and the guide sells nothing.
- A badge is not an endorsement, a rating, an award or an accreditation. It
  does not mean Utah Museums inspected, reviewed or approved a museum. It says
  the museum has a page in the guide (Featured) or that you support the guide
  (Supporter).
- Use Featured only while your museum has a page in the guide. If your page
  comes down, please take the badge down too.


2. CHOOSE A FILE

Each badge comes in two sizes and three colors.

Compact   display at 220 px wide (minimum 180 px). For narrow columns and
          sidebars.
Wide      display at 320 px wide (minimum 280 px). For wider sections and
          partner rows.

white     white body, green band. For white or light pages.
ink       dark navy body, yellow band. For dark pages, or to stand out on a
          light one.
green     green body, dark band. Works on almost any background.

Folders:
badges/featured/compact/   badges/featured/wide/
badges/supporter/compact/  badges/supporter/wide/

Each badge has three files:
.svg      first choice for a website. All lettering is outlined, so no fonts
          are needed, and it stays sharp at any size.
.png      normal size (220 or 320 px wide). Use if your site builder will not
          take SVG.
@2x.png   twice the pixels (440 or 640 px wide) for sharp screens. Show it at
          half its pixel width, 220 or 320 px.

PREVIEW.png shows every file on one sheet.


3. PLACEMENT

- Put the badge on one page, such as your About, Visit or Press page, not a
  sitewide footer.
- Show it at the recommended width with the height set to auto. Never below
  the minimum width.
- Keep clear space of at least 12 px on every side. Nothing else (text,
  other logos, the edge of a box) inside that space.
- Do not stretch, squash, rotate, recolor, crop or redraw the badge, and do
  not add words to it. The offset shadow is part of the file; leave it in.
- Do not use the badge in a way that suggests Utah Museums rates, ranks,
  certifies or sponsors you, or speaks for you.
- The badge always links to utahmuseums.com: to your page for Featured, to
  the home page for Supporter.


4. ADD IT TO YOUR WEBSITE

1. Upload the badge file to your website's media library.
2. Place it on one page, such as your About, Visit or Press page, not a
   sitewide footer.
3. Set the image link (Featured: your page on utahmuseums.com. Supporter:
   https://utahmuseums.com/).
4. Set the alt text: "Featured in Utah Museums" or "Proud Supporter of
   Utah Museums".

Replace YOUR_BADGE_IMAGE_URL with the address of the file you uploaded.
For a wide badge, change width="220" to width="320".

Featured (replace alf-engen-ski-museum with your museum's slug, the last part of your
page's address on utahmuseums.com):

<a href="https://utahmuseums.com/alf-engen-ski-museum/">
  <img src="YOUR_BADGE_IMAGE_URL" alt="Featured in Utah Museums" width="220" style="max-width:100%;height:auto;display:block">
</a>

Supporter:

<a href="https://utahmuseums.com/">
  <img src="YOUR_BADGE_IMAGE_URL" alt="Proud Supporter of Utah Museums" width="220" style="max-width:100%;height:auto;display:block">
</a>

Sharp on every screen with PNG (use both files):

<a href="https://utahmuseums.com/">
  <img src="utah-museums-supporter-compact-white.png" srcset="utah-museums-supporter-compact-white@2x.png 2x" alt="Proud Supporter of Utah Museums" width="220" style="max-width:100%;height:auto;display:block">
</a>


5. COLORS AND TYPE

Ink #1E2235, green #267F53, yellow #FCCA59, pink #F296BD, white #FFFFFF.
Wordmark: Bagel Fat One. Badge caption: Figtree ExtraBold. Both are
open-source Google fonts, and both are already outlined in these files.

Questions: https://utahmuseums.com/supporter/ (the page has an email link)
